PVC Sponge & Foam

Low Density PVC

V700 Series

This economical general purpose foam tape is manufactured for use in applications requiring positive seals on irregular surfaces or when flex and conformability to seal tight radius curves are critical considerations. This material is a self-extinguishing, flame retardant formulation that meets FMVSS 302A Specifications. This material is available with or without an acrylic adhesive. Low-density PVC is also available cast onto a 1.5 mil polyester film to provide dimensional stability, reducing stretching of the foam, reducing wear, and preventing sticking to surfaces. This material is inherently resistant to fire, ultraviolet rays, most chemicals, and solvents.

      TYPICAL PHYSICAL PROPERTIES                 V700
Test Method Property Value
ASTM D-1667 Density,  lbs/cu.ft 7
ASTM D-2240 Hardness (shore 00) 14
ASTM D-1667 Compression Deflection @ 25%   (psi) 4
GTP (1) Water Absorption (% by volume) 1.1
ASTM D-412 Tensile Strength   (psi) 25
ASTM C-518 Thermal Conductivity (k factor) (btu-in.)/ (hr.sq.ft.) (°F) 0.27
  Recommended Service Temperature  (°F) -40 – 180
                                                              (°C) -40 – 82
 
Recommended Application Temperature  (°F)
                                                                        (°C)
 50-110
10-45
 Fungi Resistance                    Excellent
 Oxidation Resistance             Excellent
 Weather Resistance               Excellent

*This data is a general guide for the selection of materials and does not constitute specification limits. It should not be used as the sole means of specifying a material for an application. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations, consult with Blaylock Gasket & Packing. Failure to select proper sealing products could result in property damage and/or serious personal injury. Specifications are subject to change without notice.
(1)    GTP Gaska Tape Procedure. Typical performance properties and based on samples tested and are not guaranteed for all samples of this product.

Medium Density PVC

V1500 Series

This medium density foam tape is manufactured for use in applications requiring positive seals on irregular surfaces. This material; provides an excellent combination of flexibility and conformability with strength and wear resistance. This material is a self-extinguishing, flame retardant formulation that meets FMVSS 302A Specifications. This material is available with or without an acrylic adhesive. V1500 series PVC foam absorbs shocks, cushions, deadens sound and eliminates excise vibration. It has excellent dimensional stability. This material is inherently resistant to fire, ultraviolet rays, most chemicals, and solvents.

      TYPICAL PHYSICAL PROPERTY                  V1500
Test Method Property Value
ASTM D-1667 Density,  lbs/cu.ft 15
ASTM D-2240 Hardness (shore 00) 40
ASTM D-1667 Compression Deflection @ 25%   (psi) 4
GTP (1) Water Absorption (% by volume) 1
ASTM D-412 Tensile Strength   (psi) 80
ASTM C-518 Thermal Conductivity (k factor) (btu-in.)/ (hr.sq.ft.) (°F) 0.3
  Recommended Service Temperature  (°F) -30 – 200
                                                                     (°C) -35 – 90
 
Recommended Application Temperature  (°F)
                                                                        (°C)
 50-110
10-45
    Fungi Resistance                       Excellent
    Oxidation Resistance                Excellent
    Weather Resistance                  Excellent

*This data is a general guide for the selection of materials and does not constitute specification limits. It should not be used as the sole means of specifying a material for an application. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations, consult with Blaylock Gasket & Packing. Failure to select proper sealing products could result in property damage and/or serious personal injury. Specifications are subject to change without notice.
(1) GTP Gaska Tape Procedure. Typical performance properties and based on samples tested and are not guaranteed for all samples of this product.

Heavy Density PVC

V2500 Series

This Heavy density foam tape is manufactured for use in the most demanding sealing or cushioning applications. High internal strength resists pressures from outside forces and high hardness resists deterioration. This material; provides an excellent combination of flexibility and conformability with strength and wear resistance. This material is a self-extinguishing, flame retardant formulation that meets FMVSS 302A Specifications. This material is available with or without an acrylic adhesive. V1500 series PVC foam absorbs shocks, cushions, deadens sound, and eliminates excise vibration. It has excellent dimensional stability. This material is inherently resistant to fire, ultraviolet rays, most chemicals, and solvents.

      TYPICAL PHYSICAL PROPERTIES                 V2500
Test Method Property Value
ASTM D-1667 Density,  lbs/cu.ft 25
ASTM D-2240 Hardness (shore 00) 58
ASTM D-1667 Compression Deflection @ 25%   (psi) 14
ASTM D-1067 Compression Set @ 25% 6
GTP (1) Water Absorption (% by volume) 1.2
ASTM D-412 Tensile Strength   (psi) 130
ASTM D-412 Percent Elongation 110
ASTM C-518 Thermal Conductivity (k factor) (btu-in.)/ (hr.sq.ft.) (°F) 0..33
  Recommended Service Temperature  (°F) -40 – 180
                                                                     (°C) -35 – 90
 
Recommended Application Temperature  (°F)
                                                                         (°C)
 50-110
 10- 45
 Fungi Resistance                           Excellent
 Oxidation Resistance                    Excellent
 Weather Resistance                      Excellent

*This data is a general guide for the selection of materials and does not constitute specification limits. It should not be used as the sole means of specifying a material for an application. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations, consult with Blaylock Gasket & Packing. Failure to select proper sealing products could result in property damage and/or serious personal injury. Specifications are subject to change without notice.
(1)    GTP Gaska Tape Procedure. Typical performance properties and based on samples tested and are not guaranteed for all samples of this product.

Click here to Contact us today or call us at 800.259.8770